Actuators and Control Systems
Turbomachinery Control Systems, Turbine Actuators and Control Systems, Actuation and Controls
Voith actuators and control systems ensure that gas turbines, steam turbines and compressors can be operated more efficiently, safely and reliably.
Our product portfolio includes:
- Turbomachinery control systems
- Turbomachinery protection systems
- Engineering, service and retrofitting
We not only offer components, but also complete solutions – hardware and software, all from one source. An advantage that simplifies a lot and lowers costs. The control system of turbines and compressors runs smoothly.
Voith Digital Solutions GmbH
Actuators and Governors
74564 Crailsheim, Germany
Tel. +49 7951 32-470
Fax +49 7951 32-605
DSG I/H Converter
An I/H converter is a current-to-pressure converters (CPC), which adjusts hydraulic positioning cylinders by means of a pilot valve.
DSM I/H Converter Module
An I/H converter module consists of two I/H converters (dual CPC) connected in parallel, which create a fully redundant system.
WSR Way Valve
A way valve is a proportional directional control valve. It has integrated position control and provides direct control of hydraulic positioning cylinders.
T-WSR Tandem Way Valve
A tandem way valve is a way valve with two control magnets (dual coil system). The control magnets are connected in series and create a redundant unit.
WSM Way Valve Module
A way valve module consists of two way valves connected in parallel which creates a fully redundant system.
SMR Control Servo Motor
A control servo motor is a linear electro-hydraulic actuator. It operates a valve that controls the mass flow needed to drive machinery.
SelCon Self-Contained Linear Actuator/Linear Drive
The SelCon is a self-contained, electrohydraulic linear actuator for control valves on gas turbines, steam turbines or for process valves. It has an integrated fail-safe function and operates without an external oil supply.
EMA Electromechanical Linear Actuator
The EMA is an electromechanical linear actuator for control valves on gas turbine, steam turbines or for process valves. It has an integrated fail-save function (spring) and is oil-free.
TripCon Trip Block
The trip block is an extremely flexible electro-hydraulic safety control unit, which is used for releasing the trip valves on steam turbines, gas turbines and in process-related equipment.
CTo Overspeed Protection
The overspeed protection system detects overspeed and actuates a hydraulic positioning cylinder directly. This cylinder opens or closes a trip valve.
Turcon DTc Steam Turbine Controller
The TurCon DTc is a configurable digital compact controller, which can be used on a wide range of steam turbines. The controller is pre-engineered and supports all established control modes.
TurCon DTm Steam Turbine Controller
The TurCon DTm is a configurable digital controller which can be used on a wide range of steam turbines. It is pre-engineered and supports all established control modes.