Graphic Paper Machines
The range of use of graphic papers
For hundreds of years, graphic paper has been a carrier of information. Voith's high-speed machines make it a global leader, especially in the area of newsprint and magazine paper.
For centuries, the great merit of graphic paper as a carrier of information has been as a storage medium for knowledge. All information is valuable, no doubt, but the paper on which it is printed can sometimes vary greatly.
From newspaper to high-gloss magazine
As a rule, mass products such as newsprint are produced with a large portion of recovered paper, often due to their short-lived topicality and for reasons of cost. By contrast, magazine paper has high requirements regarding appearance, both visual and sometimes even tactile. For this reason, the portion of fresh fibers in the paper suspension usually predominates. But more and more frequently, such high-quality paper is being produced with a large portion of recovered paper. Voith’s deinking technology plays a big role here: The raw material for new paper can be provided from recovered paper in the thousands of tons.
Engineered for success
Voith modernizes Braviken PM 53
Services and products for papermaking
As a system vendor we aim to support our customers throughout the entire value creation process, so we are expanding our service locations worldwide, adapting our range of services to customer needs and also adopting new approaches to service with Papermaking 4.0.
Social media news
More interesting topics for you
With the DuoFormer D, Fourdrinier wire and hybrid formers are converted to modern counterblade technology – resulting in increased dewatering capability and improved formation.read more
The DuoFormer TQb is a roll-blade gap former with loadable forming blades. It is used exclusively for machine rebuilds and contributes to the improvement of quality and formation.read more
The DuoFormer TQv is a vertical roll-blade gap former that was developed for fast-running machines and ensures optimal sheet quality for all mass-produced papers.read more
At the HydroFormer test facility in Düren (Germany), new products can be tested and their production on an inclined wire verified, minimizing the investment risk.read more
Voith offers several components for efficient edge control on wires in top formers and Fourdrinier formers.read more
Voith’s CleanLine offers a complete range of cleaning systems to cover every section of your paper machine.read more
The dandy roll improves quality on Fourdrinier wire machines up to 1,000 m/min. The key feature is the patented self-supporting honeycomb with a large open surface.read more
The DuoShake optimizes fiber orientation through high-frequency shaking of the breast roll. The result is good formation with all paper grades and a low tensile strength ratio.read more
With the EdgeModule edge feeding system, the volume flow of the suspension in the edge area of the headbox can be set. The result is a precise suspension edge.read more
The FloatBearing hydrodynamic bearing reduces the friction between the metallic surfaces of a shaking unit even at low machine speeds thereby minimizing wear.read more
HydroPack is a pressure supply unit with a speed-controlled piston pump. A perfect cutting jet uninterrupted by air bubbles ensures good web pickup at the pick-up roll.read more
The HydroSquirt allows a good, reproducible cutting result before the paper web is fed into the press section. This is possible due to precise setting of the water jet.read more
The InsiderJet is a high-pressure cleaning pipe that cleans the suction roll from the inside out. Clean holes result in optimal dewatering and minimal downtime.read more
The JetCleaner creates ideal dewatering conditions through uniform cleaning and drying of the forming fabric. Breaks in the press and dryer section are prevented.read more
The OnQ ModuleJet control system changes the stock consistency sectionally by adding dilution water. Retrofitting is possible on older headboxes.read more
TrimGuard is a vacuum box located within the bottom wire across from the pick-up roll. It prevents edge trimmings from flying into the press causing high maintenance costs.read more
The CS roll is a center-supported roll that improves the wire running conditions and allows a uniform wire structure over the width.read more
The EvoFlow suction roll is designed to meet specific production requirements. Shell surface patterns that increase drainage capacity and reduce noise generation allow EvoFlow suction rolls to improve the economic efficiency and operating environment of paper production.read more
EvoRun wire guide rolls and drive rolls are used in the wire sections of paper, board and packaging machines. They are for guiding, supporting or controlling the clothing and web.read more
TRM analyzes and optimizes all factors throughout the entire roll system. This comprehensive concept increases the availability of the rolls and reduces the number of shutdowns due to roll problems.read more
The HydroJet and Double HydroJet are a couch squirt that creates a tail for threading with a consistently clean water jet cut. After successful threading, the HydroJet and Double HydroJet widen the tail to the width of the full web. The automated process supports machine workers and lessens their workload during the threading phase.read more