Graphic Paper Machines
The range of use of graphic papers
For hundreds of years, graphic paper has been a carrier of information. Voith's high-speed machines make it a global leader, especially in the area of newsprint and magazine paper.
For centuries, the great merit of graphic paper as a carrier of information has been as a storage medium for knowledge. All information is valuable, no doubt, but the paper on which it is printed can sometimes vary greatly.
From newspaper to high-gloss magazine
As a rule, mass products such as newsprint are produced with a large portion of recovered paper, often due to their short-lived topicality and for reasons of cost. By contrast, magazine paper has high requirements regarding appearance, both visual and sometimes even tactile. For this reason, the portion of fresh fibers in the paper suspension usually predominates. But more and more frequently, such high-quality paper is being produced with a large portion of recovered paper. Voith’s deinking technology plays a big role here: The raw material for new paper can be provided from recovered paper in the thousands of tons.
Engineered for success
Voith modernizes Braviken PM 53
Services and products for papermaking
As a system vendor we aim to support our customers throughout the entire value creation process, so we are expanding our service locations worldwide, adapting our range of services to customer needs and also adopting new approaches to service with Papermaking 4.0.
Social media news
More interesting topics for you
LC cleaning systems are used to remove fine heavy and lightweight contaminants as well as entrained air. This provides a clean fiber material but also reduces wear and tear in the downstream equipment.
HiClean HCL5-l with EcoMizer technology is a multi-stage system for cleaning fiber suspensions. It removes heavy contaminants in the stock preparation and approach flow systems.read more
The high-consistency cleaners HiCC400B and HiCC 600B reliably remove heavy ingredients from pulp suspensions at consistencies up to 4.5%, thereby protecting downstream machines against wear.read more
The LKS60 low consistency cleaner is a 2 1/2" cleaner that removes specifically heavy contaminants from the pulp suspension in stock preparation and approach flow systems.read more
The OnC BallValve 500 ball valves are shut-off valves that can be activated both pneumatically as well as manually. Their opening is unlimited and the spindle seal is maintenance-free.read more
OnC ConSens 700 is an optical sensor with integrated air bubble compensation. With its six-channel alternating stream process, it measures the overall stock consistency together with ash and fines.read more
OnC PressSens is a high-quality pressure sensor with hydrostatic pressure and level transmitters. Depending on the order specification, it is used for measuring fill level, pressure or vacuum.read more
OnQ WetEndControl controls and optimizes chemical addition in the approach flow system. This prevents negative effects due to overdosed chemicals and reduces chemical costs.read more
IntensaRotor R is used to pulp all sorts of secondary fibers. Due to its new rotor design, it brings about low energy consumption and an optimal pulping effect.read more
The new design of Voith’s IPV Rotor achieves energy-saving and at the same time efficient pulping in stock preparation.read more
The junk trap type II supplementary package improves the functioning of the junk trap in cleaners. The standardized trap minimizes the stocking of replacement parts.read more
The Vortex Breaker is a rotary brake for junk traps. The ready-to-install retrofit set extends the service life of knife gate valves and facilitates reliable functioning of the trap.read more
H-Cone, E-Cone and IndiCone are wear-resistant cones for reliable and efficient use with high stock consistencies.read more