This site uses cookies which allow us to give you the best browsing experience possible. To find out more, please see our Privacy Policy.

Menu
  • test
  • test
  • test
  • test
  • test

Overhaul of load safety devices on lift gates in the dryer section

Overhaul of load safety devices on lift gates in the dryer section

Improving safety through Voith maintenance

Load safety devices prevent the lift gates on the dryer section from falling. An overhaul of the devices is required by the manufacturer and increases safety in accordance with DIN EN 360.

With the overhaul of load safety devices, the devices have to be removed and dismantled and all parts have to be checked, reassembled and tested. The same procedure also has to be employed after activation of a load safety device. This is usually clearly visible due to a color change in the inspection window (red instead of green) or if the check bolt has been released (out instead of in). For a quick overhaul of the load safety devices, the existing units are replaced with units tested by Voith, along with a test book. New devices are required only if the existing ones are completely defective.

The overhaul of the load safety devices on lift gates in the dryer section is required by the manufacturer. Voith assumes responsibility for regular maintenance and replacement.

RIGHT OFFCANVAS AREA