Service for Bus - DIWA - Service Products

News

Low life cycle costs with the DIWA SmartNet Bus Monitor: Voith helps fleet operators to realize low maintenance and repair costs while simultaneously maintaining high vehicle availability.

Zur Großansicht

Due to their central position, automatic transmissions are important interfaces in vehicles, and can be used to capture operating data without additional sensors. In order to utilize this data efficiently, reliable and quick access is necessary.

DIWA SmartNet utilizes the capabilities of state-of-the-art communication technology with the help of a proven transmission module installed in the vehicle and the forwarding of data via a web server to the Voith IT world.

The DIWA SmartNet Bus Monitor enables simple and fast access via the Internet. This means that the operator has an overview of all relevant vehicle data.

DIWA SmartNet makes it possible to realize low costs for maintenance and repairs while simultaneously maintaining high vehicle availability. At the same time, the operator is optimally informed about the condition of the Voith transmission and thus provided with a simple and efficient way of monitoring.

Advantages of the DIWA SmartNet Bus Monitor:

  • Permanent status monitoring via key parameters
  • Fast identification of the condition of the transmission with the help of traffic light display system
  • Visualization of important operating data
  • Complete ECU file for analysis
  • Maintenance recommendations
  • Automatic emergency email or SMS


To keep you on track

DIWA Smart Service

With DIWA SmartService you increase the value and availability of your buses.
A service that pays off long term. Find out more in our new, interactive DIWA Smart Service application.

Voith Turbo Commercial Vehicles forms new Smart Services division

In October 2015, Voith Turbo formed the Smart Services division under the umbrella of Aftersales & Services, with the aim of realizing a substantial reduction in life cycle costs.

With Smart Services, Voith Turbo Mobility bundles its transmission know how and its extensive knowledge of drivelines with existing telematics solutions such as DIWA SmartNet. Smart Services is focused on the development of new services and products, especially in the area of fuel consumption and maintenance.

Smart Services allows us to quickly respond to customer requirements and to act flexibly in the dynamic market for telematics solutions. We have already won customers for pilot projects and are demonstrating initial potential savings.

New FAQs available for DIWA: Answers to the most important questions regarding the DIWA transmission

The core of the new FAQs is to support operators during maintenance and repairs of their Voith DIWA transmissions. In doing so, Voith offers its customers the opportunity to quickly find the optimal solution.

The new FAQs answer questions for example about oil changes and the oil release list. At the same time, the FAQs also offer help regarding the acquisition of Voith original spare parts, repair options, and other questions.

DIWA FAQs overview

Transmitting operating data in an even smarter way: Voith rolls out SmartCase for the transmission of telemetry data via WiFi

In April 2016, Voith Commercial Vehicles extended its product range in the area of telemetry. With the development of the Voith SmartCase, operating data can be transmitted not only with the SmartBox via cellphone networks, but alternatively also via a local WiFi hotspot and the Internet.

This gives customers the opportunity to cost-effectively monitor their car fleets by connecting to the Voith SmartNet without needing a SIM card. The fleet operator thus has all the benefits of the Voith SmartNet in the areas of maintenance / repairs, vehicle availability, and fuel consumption.

Voith SmartNet

 

DIWA diagnostic tools

The search for malfunctions in the DIWA control system can be a time-consuming, complex task without professional diagnostic tools. We offer the appropriate tools for comprehensive diagnostics on the DIWA control system.

Aladin diagnostic software

Using Aladin you can detect existing malfunctions in the control system, open measured values, and perform tests.

Access Aladin here  (264.55 MB)

Interface 

An interface is required for the connection between the vehicle and PC (ALADIN). They are available with USB, Bluetooth, WLAN, and RS232 interfaces.

The following interfaces can be used to establish the connection between the vehicle and PC:

 

DIWA.3 DIWA.5 DIWA.6 VIAB Order number
E200 E310 KWP2000 UDS
Serial RS232 (COM) interface X X X X X 151.00152911
USB interface(Samtec HS Light) X X X X 151.00202110
BlueCom interface X X X X X 151.00400610
SmartCase interface X X X X X 151.01297310
SmartCase XT interface X X X X X 151.01297210

 

¹ Loading the software in the E200 also requires a cable with a switch to interrupt the ECU power supply.

 

Please note that different VOITH products and controllers use different communications protocols. As such, not every interface can be used for every controller.

Connection cable via UDS for Smart Case Interface / Smart Case XT Interface

  • Voith OBD2 Adapter 150.01368510 (Evobus, MAN, or Solaris)
  • Voith OBD2 Adapter 150.01368610 (VDL)
  • Voith OBD2 Adapter 150.01368710 (IvecoBus)
  • Voith OBD2 Adapter 150.01368810 (ADL)
  • Voith OBD2 Adapter 150.01368910 (Scania)

 

Reman DIWA

Voith insists on the highest quality not only for newly produced gearboxes, but also refurbished gearboxes. Voith DIWA gearboxes are fully refurbished at our factory in Garching near Munich. By using the most up-to-date processes, we are able to modernize DIWA gearboxes so that they are as good as new. Additionally, customers benefit from the technical advances in the series gearbox. Naturally, these advancements flow into our Reman products as well.

Your concrete benefits from Voith Remanufacturing:

  • Green: Reduce your ecological footprint by using refurbished products.
  • Profitability: Reduce your operating costs by using refurbished products, which are generally 50-75% cheaper than new parts.
  • Power: High-quality components that are not only repaired, but also technically brought up to the state of the art.

            "Before"

            "After"

 

DIWA Repairs / Maintenance

We offer on-site service for municipal bus gearboxes. From troubleshooting/diagnostics to complete overhaul of gearboxes. We also offer consultation on preventative overhauls. We also offer the opportunity to use replacement gearboxes or have factory repairs in the maintenance contract. You will find the contact person for your region under Contacts.

 

Why Voith Original Spare Parts?

DIWA: 

What may initially appear to be the same can be expensive in the end: due to deficient processing, low-quality materials, or poor design. Avoid expensive subsequent damage - by using original Voith spare parts. Reliable, robust, economical: Only Voith Original Spare Parts are technically of state-of-the-art series production and tuned perfectly to the complete system. Additionally, with our original spare parts we offer high product quality and thus mobility and security when on the road.

Gearbox-specific spare parts catalogs save you time-consuming, costly searches. And: The parts will be available for at least 15 years - guaranteed! For a preventive overhaul, Voith offers high-quality replacement gearboxes and components for the central DIWA gearbox assemblies. Without compromising quality and reliability: You reduce the downtime for your buses and lower repair and overhaul costs.

We provide you with a 1 year warranty for spare parts and replacement parts. Of course, we take back your old parts and dispose of them properly.

 

DIWA Retrofit

For questions regarding retrofits please contact your sales company or local service partner. Here is an overview of our service partners.

Contact

Voith Turbo GmbH & Co. KG
Mobility Service
Alexanderstraße 2
89522 Heidenheim, Germany

Service

Technical Support
Tel. +49 7321 37-4152
diwa@voith.com

Spare Parts Orders
Tel. +49 7321 37-4000
Fax +49 7321 37-7805
VTSparepartsCV@voith.com

Trainings
Ms Sabrina Lipok:
Tel. +49 5341 21 5446
Mr Sascha Koch:
Tel. +49 5341 21 4872

Find Your Regional Contact

Please Select

Mobility service information system

Click here for more information about the mobility service information system



Publications

Stay Green at every Red Light. Experience the new DIWA.6 Start-Stop Technology

Stay Green at every Red Light. Experience the new DIWA.6 Start-Stop Technology

Download PDF

Worldwide Successful. DIWA Automatic Transmissions

Worldwide Successful. DIWA Automatic Transmissions

Download PDF

Synthetic Lubricant for Voith DIWA Transmissions. V LIQUID BLU S

Synthetic Lubricant for Voith DIWA Transmissions. V LIQUID BLU S

Download PDF

DIWA SmartNet

DIWA SmartNet

Download PDF

SensoTop

SensoTop

Download PDF

Smart Services – Intelligent Systems for Higher Efficiency

Smart Services – Intelligent Systems for Higher Efficiency

Download PDF