Sensor accessories

Sensor accessories

Supply from one source

Sensor accessories are a complementary component to the product range of Voith. Therefore, a large range of accessories is available for the measuring instruments including various process connections, manifold valve blocks, and mounting stets.

Sensor accessories

The transmitter service valves allow disconnecting a pressure transmitter from the process without interrupting the production. Our customers benefit from a supply from one source.

Model overview Sensor accessories 

Manifold valve blocks milled

Sensor accessories

Manifold valve blocks milled

Manifold blocks
Voith offers a large variety of valves and manifolds with different options. Two, three and five valve manifolds, manifold combinations and multi-way cocks for use on general applications for liquid, gas and steam service. They are suitable for shutting off the impulse lines and for mounting to pressure and differential pressure instruments. These manifold combinations and multi-way cocks are for (1/2 NPT) direct mounting according to DIN EN 61518 or for remote mounting. Process connections are with threads or with pipe fittings.

Manifold valve blocks forged

Manifold valve blocks forged

Manifold blocks
Process connections with compression fitting or welded connection.

 

  • Multi-way cocks PN100, plug seal made of PTFE carbon
  • Manifolds PN420, metal seated, PTFE packing for temperatures up to 200 °C (manifolds for direct mounting 120 °C at the transmitter/manifold interface)
  • Graphite packing and sealing rings available for high temperature service
  • Purge valves on manifold combinations suitable for temperatures up to 550 °C

Gauge valves and accessories

Sensor accessories

Gauge valves and accessories

Gauge valves and accessories
This product group includes standardized gauge valves, gauge cocks, Siphons and gauge supports as well as gauge protectors and gauge snubbers. Apart from the standard materials brass, carbon steel and stainless steel, other materials are available.

Welding sockets and flanges PT/LT

Sensor accessories

Welding sockets and flanges for PT/LT

Process connections
Welding sockets are used to connect level and pressure sensors to the process. In some cases there is a difference between welding sockets for vessels and for pipelines. The welding sockets are used for certain types of instruments, depending on the version. Also, threaded flanges are available.

 

  • Thread fittings and welding rings
  • Tri-Clamp connections
  • Hygienic fitting
  • Bolting according to DIN/EN
  • Flange connections
  • Welding dummies and plugs

Mounting sets for valve blocks and transmitters

Mounting sets for valve blocks and transmitters

Mounting sets
Included in these sets are mounting brackets with manifold accessories for mounting the manifold to a wall, a tube or a rack. Accessory kits with screws and bolts are supplementary available.

OnC TransValve 300

Sensor accessories

OnC TransValve 300 transmitter service valve


TV300 for pressure transmitter PT182
OnC TransValve is a ball-type mounting and service ball valve for level and pressure transmitters. This valve makes it simple to disconnect the transmitter from the process for maintenance and cleaning purposes without interrupting the process or draining the tank.

 

  • Nominal pressure PN6
  • Process connection flange DN80
  • Optionally provided with flushing connections G1/8“F
  • For PT182 with G1“

OnC TransValve 310

TransValve

OnC TransValve 310 transmitter service valve

TV310 for pressure transmitter PT182
OnC TransValve is a ball-type mounting and service ball valve for level and pressure transmitters. This valve makes it simple to disconnect the transmitter from the process for maintenance and cleaning purposes without interrupting the process or draining the tank. OnC TransValve is a trans valve with nominal pressure PN16 and with a ball housing as well as an additional locking device for service positioning.

 

  • Nominal pressure PN16
  • Locking device
  • Different flange or welding ends process connections
  • For PT182 with G1“

OnC TransValve 500

OnC TransValve 500 transmitter service valve

TV500 for pressure transmitter PT182
OnC TransValve is a ball-type mounting and service ball valve for level and pressure transmitters. This valve makes it simple to disconnect the transmitter from the process for maintenance and cleaning purposes without interrupting the process or draining the tank. OnC TransValve is available as a manually operated type with different process connections, preferably flange DN80 for tank application.

 

  • Nominal pressure PN40
  • Maximum measuring cell diameter 40 mm



Publications

OnC FieldInstruments - Comprehensive equipment from a single source

OnC FieldInstruments - Comprehensive equipment from a single source

Download PDF

More information: