This site uses cookies which allow us to give you the best browsing experience possible. To find out more, please see our Privacy Policy.

Menu
  • test
  • test
  • test
  • test
  • test

Components for Papermaking

Services and products for papermaking

    As a system vendor we aim to support our customers throughout the entire value creation process, so we are expanding our service locations worldwide, adapting our range of services to customer needs and also adopting new approaches to service with Papermaking 4.0.

    Product of the month

      From the fiber to the finished paper we offer a diverse product portfolio for any application. In order to give you an insight into our product world, we present one product for the paper industry every month. Find out more about our current product of the month.

      Optimization

      Optimization

      For the optimization of your paper machine, Voith provides a comprehensive product program to fully utilize the economic potential of your production line. All components serve to increase quality and/or output at low operating costs per ton of salable materials.

      • Cleaning

      Cleaning

      | Optimization | Cleaning
      Wear-resistant Cones for HD Cleaner

      H-Cone, E-Cone and IndiCone are wear-resistant cones for reliable and efficient use with high stock consistencies.

      Read more

      • Constant Part Screening

      Constant Part Screening

      | Optimization | Constant Part Screening
      C-bar C

      Thanks to fine slots, the C-bar C improves the screening efficiency in comparison to conventional screen baskets. It can be used in all centripetal screening machines.

      Read more
      | Optimization | Constant Part Screening
      C-bar Insert

      The new screen basket C-bar Insert combines maximum stability with short downtimes and low investment and maintenance costs. It can be used in cages from Voith and other manufacturers.

      Read more

      • Headbox

      Headbox

      | Optimization | Headbox
      EdgeExpert

      The unique edge trim concept EdgeExpert defines the web edge in the stock jet as it exits from the headbox, resulting in fiber savings and increased edge stability.

      Read more
      | Optimization | Headbox
      FlowJec

      With FlowJec, Voith has developed today’s most efficient dosing system for sustainable and resource-conserving dosing of all chemicals and additives in the paper manufacturing process.

      Read more
      | Optimization | Headbox
      Pulsation damper

      The pulsation damper is upstream of the headbox and guides the stock suspension from the feed to machine-wide distribution. It dampens high-frequency disturbances from screens and pumps.

      Read more
      | Optimization | Headbox
      Turbulence insert with lamellas

      The turbulence insert with lamellas prevents vortices in the headbox and has a positive effect on jet and paper quality. Formation streaks and surface marks are prevented in the process.

      Read more

      • Forming section

      Forming section

      | Optimization | Forming section
      ClearStar

      ClearStar is a double doctor for the suction couch roll, which prevents water that has been carried along from bleeding through onto the paper web. A higher dry content is thus possible.

      Read more
      | Optimization | Forming section
      Dandy roll

      The dandy roll improves quality on Fourdrinier wire machines up to 1,000 m/min. The key feature is the patented self-supporting honeycomb with a large open surface.

      Read more
      | Optimization | Forming section
      dBlocker

      The dBlocker absorbs extremely high sound levels and reduces paper machine noise. This has a positive impact on the concentration levels and performance of the personnel.

      Read more
      | Optimization | Forming section
      DuoCleaner Excell

      DuoCleaner Excell is an efficient cleaning system for consistent and uniform cleaning of the surface and structure of forming and press fabrics.

      Read more
      | Optimization | Forming section
      DuoFormer D

      With the DuoFormer D, Fourdrinier wire and hybrid formers are converted to modern counterblade technology – resulting in increased dewatering capability and improved formation.

      Read more
      | Optimization | Forming section
      DuoShake

      The DuoShake optimizes fiber orientation through high-frequency shaking of the breast roll. The result is good formation with all paper grades and a low tensile strength ratio.

      Read more
      | Optimization | Forming section
      EdgeCleaner

      EdgeCleaner cleans the edges of Fourdrinier or top wires with adjustable fan-type nozzles, thereby reducing wire edge contamination and increasing wire running time.

      Read more
      | Optimization | Forming section
      EdgeCurler

      Using the EdgeCurler wire edge lifter prevents the stock suspension from bleeding at the wire. The result is a clean paper edge and wire edge.

      Read more
      | Optimization | Forming section
      EdgeDeckle

      The EdgeDeckle is used to control the edge on Fourdrinier wires with large lip openings. It prevents the stock suspension from bleeding at the sides and provides for cleanliness in the headbox.

      Read more
      | Optimization | Forming section
      EdgeExpert

      The unique edge trim concept EdgeExpert defines the web edge in the stock jet as it exits from the headbox, resulting in fiber savings and increased edge stability.

      Read more
      | Optimization | Forming section
      EdgeMaster

      EdgeMaster is a variably adjustable extension of the headbox format plate. In the Fourdrinier wire and the hybrid former, it provides for uniform distribution of the stock suspension up to the edge.

      Read more
      | Optimization | Forming section
      EdgeModule

      With the EdgeModule edge feeding system, the volume flow of the suspension in the edge area of the headbox can be set. The result is a precise suspension edge.

      Read more
      | Optimization | Forming section
      Fabric run-off alarm

      The fabric run-off alarm from Voith ensures that the fabrics or press felts in case of a failure of the fabric run control cause no damage.

      Read more
      | Optimization | Forming section
      FloatBearing

      The FloatBearing hydrodynamic bearing reduces the friction between the metallic surfaces of a shaking unit even at low machine speeds thereby minimizing wear.

      Read more
      | Optimization | Forming section
      FloatLip-Former

      The FloatLip former is a cylinder mold unit that facilitates uniform distribution of the suspension over the machine width, providing even profiles for board and packaging paper.

      Read more
      | Optimization | Forming section
      FlowJec

      With FlowJec, Voith has developed today’s most efficient dosing system for sustainable and resource-conserving dosing of all chemicals and additives in the paper manufacturing process.

      Read more
      | Optimization | Forming section
      HDU control system upgrade

      The HDU control system upgrade includes replacement of the pendulum sensor and pneumatic controls in older belt-guiding systems. Clothing wear can thus be reduced.

      Read more
      | Optimization | Forming section
      HDU Guide

      The HDU Guide is a fabric and felt run controller that ensures directional stability of the clothing over a long period. It serves to noticeably reduce edge wear.

      Read more
      | Optimization | Forming section
      HydroPack

      HydroPack is a pressure supply unit with a speed-controlled piston pump. A perfect cutting jet uninterrupted by air bubbles ensures good web pickup at the pick-up roll.

      Read more
      | Optimization | Forming section
      HydroSquirt

      The HydroSquirt allows a good, reproducible cutting result before the paper web is fed into the press section. This is possible due to precise setting of the water jet.

      Read more
      | Optimization | Forming section
      InsiderJet

      The InsiderJet is a high-pressure cleaning pipe that cleans the suction roll from the inside out. Clean holes result in optimal dewatering and minimal downtime.

      Read more
      | Optimization | Forming section
      JetCleaner

      The JetCleaner creates ideal dewatering conditions through uniform cleaning and drying of the forming fabric. Breaks in the press and dryer section are prevented.

      Read more
      | Optimization | Forming section
      OnQ ModuleJet retrofit

      The OnQ ModuleJet control system changes the stock consistency sectionally by adding dilution water. Retrofitting is possible on older headboxes.

      Read more
      | Optimization | Forming section
      SeaLencer

      SeaLencer is a sealing strip system for suction rolls. It substantially reduces the noise stress in the area of the paper or board machine, while achieving a longer service life through a lower drive power.

      Read more
      | Optimization | Forming section
      Tensioning devices and guides

      The tensioning devices and guides from Voith ensure smooth operation of the machine at all times.

      Read more
      | Optimization | Forming section
      TrimGuard

      TrimGuard is a vacuum box located within the bottom wire across from the pick-up roll. It prevents edge trimmings from flying into the press causing high maintenance costs.

      Read more

      • Press section

      Press section

      | Optimization | Press section
      Bubble Sucker

      The bubble sucker in the press section provides for a stable web run and reduces or eliminates blistering of the paper web before its entry into the press nip.

      Read more
      | Optimization | Press section
      Cleaning roll

      With the switch-on of a vacuum, the paper web can tear after immersion of the pick-up suction rolls and be guided with the felt into the press nip. This can lead to paper shreds flying about. Damage to the felt or contamination of the protective wall can then result.

      Read more
      | Optimization | Press section
      dBlocker

      The dBlocker absorbs extremely high sound levels and reduces paper machine noise. This has a positive impact on the concentration levels and performance of the personnel.

      Read more
      | Optimization | Press section
      DuoCleaner Excell

      DuoCleaner Excell is an efficient cleaning system for consistent and uniform cleaning of the surface and structure of forming and press fabrics.

      Read more
      | Optimization | Press section
      DuoTransferFoil

      The DuoTransferFoil with drilled roll stabilizes the web on the dryer fabric. By using it, problems such as edges peeling away, fluttering and the formation of wrinkles on the paper web are eliminated.

      Read more
      | Optimization | Press section
      Fabric run-off alarm

      The fabric run-off alarm from Voith ensures that the fabrics or press felts in case of a failure of the fabric run control cause no damage.

      Read more
      | Optimization | Press section
      FilmLube

      FilmLube ensures uniform Uhle box lubrication at all times; thereby achieving even press felt conditioning, water savings and improved paper quality.

      Read more
      | Optimization | Press section
      FlexDoc

      The FlexDoc water scraper ensures optimal and targeted dewatering in the press sleeve. Cleanliness in the press section is thus increased, and the total storage volume in the nip is utilized.

      Read more
      | Optimization | Press section
      HDU control system upgrade

      The HDU control system upgrade includes replacement of the pendulum sensor and pneumatic controls in older belt-guiding systems. Clothing wear can thus be reduced.

      Read more
      | Optimization | Press section
      HDU Guide

      The HDU Guide is a fabric and felt run controller that ensures directional stability of the clothing over a long period. It serves to noticeably reduce edge wear.

      Read more
      | Optimization | Press section
      HydroPack

      HydroPack is a pressure supply unit with a speed-controlled piston pump. A perfect cutting jet uninterrupted by air bubbles ensures good web pickup at the pick-up roll.

      Read more
      | Optimization | Press section
      HydroSeal

      HydroSeal is the first to provide the option of dispensing with the conventional lubricating shower regardless of type of suction roll or manufacturer.

      Read more
      | Optimization | Press section
      InsiderJet

      The InsiderJet is a high-pressure cleaning pipe that cleans the suction roll from the inside out. Clean holes result in optimal dewatering and minimal downtime.

      Read more
      | Optimization | Press section
      ProRun

      The ProRun system specifically reduces the nip vacuum in the pick-up area of the center roll in the press. This reduces the load on the wet paper web when removing it from the center roll.

      Read more
      | Optimization | Press section
      SeaLencer

      SeaLencer is a sealing strip system for suction rolls. It substantially reduces the noise stress in the area of the paper or board machine, while achieving a longer service life through a lower drive power.

      Read more
      | Optimization | Press section
      SensoTension P

      The SensoTension P felt tensioning system provides constant and reliable press felt tension. It gives the felt a longer service life and prevents vibrations and measurement failures.

      Read more
      | Optimization | Press section
      Short paper run

      A shortening of the free paper run is recommended on smooth press rolls. With the short paper run, the paper web runs in a stable and crease-free manner without web flutter.

      Read more
      | Optimization | Press section
      Tensioning devices and guides

      The tensioning devices and guides from Voith ensure smooth operation of the machine at all times.

      Read more
      | Optimization | Press section
      ThreadConcept

      The ThreadConcept is the right solution for threading the paper tail through the press section, from the center roll via the stand-alone press into the dryer section.

      Read more
      | Optimization | Press section
      TransferFoil

      TransferFoil stabilizes the web from the press into the dryer section, eliminating problems such as edge detachment, edge flutter and crease formation.

      Read more
      | Optimization | Press section
      VibroSoft

      VibroSoft is a hydrodynamic vibration damper that reduces vibrations for profile rolls and floating rolls, resulting in extended service life of felts, roll covers and doctors.

      Read more

      • Dryer section

      Dryer section

      | Optimization | Dryer section
      Conversion of dryer section to partial drive

      Productivity can be increased by converting the dryer section to a partial drive, while simultaneously reducing maintenance costs.

      Read more
      | Optimization | Dryer section
      DryStar

      The modular DryStar upgrade package offers the possibility of ropeless threading and the certainty of increasing the runnability of the paper machine by stabilizing the web. This means that downtimes due to breaks or rope maintenance can be reduced. Threading times can also be reduced as a result of ropeless threading.

      Read more
      | Optimization | Dryer section
      DuoCleaner Express

      DuoCleaner Express was developed for effective cleaning of dryer fabrics - for good paper quality and efficient machine operation.

      Read more
      | Optimization | Dryer section
      DuoFoil

      In the scope of rebuilds to paper machines with a single-tier dryer, which use suctioned rolls (known as dryer fabric suction rolls, DFSR), the DuoFoil can be installed over the DFSR in order to stabilize the web. With stabilization zones the DuoFoil supports wrinkle-free sheet edges from dryer cylinder to dryer cylinder. The negative pressure in the stabilization zone is created via the "pre-suction" zone in the DFSR. This increases the runnability of the paper machine.

      Read more
      | Optimization | Dryer section
      DuoStabilizer

      The DuoStabilizer provides web stabilization in the single-tier dryer section. Due to the ropeless and wrinkle-free web run, the runability of the paper machine is increased.

      Read more
      | Optimization | Dryer section
      DuoTransferFoil

      The DuoTransferFoil with drilled roll stabilizes the web on the dryer fabric. By using it, problems such as edges peeling away, fluttering and the formation of wrinkles on the paper web are eliminated.

      Read more
      | Optimization | Dryer section
      Fabric run-off alarm

      The fabric run-off alarm from Voith ensures that the fabrics or press felts in case of a failure of the fabric run control cause no damage.

      Read more
      | Optimization | Dryer section
      HDU control system upgrade

      The HDU control system upgrade includes replacement of the pendulum sensor and pneumatic controls in older belt-guiding systems. Clothing wear can thus be reduced.

      Read more
      | Optimization | Dryer section
      HDU Guide

      The HDU Guide is a fabric and felt run controller that ensures directional stability of the clothing over a long period. It serves to noticeably reduce edge wear.

      Read more
      | Optimization | Dryer section
      Optimized dryer fabric run

      Through conversion to internal-only dryer fabric guide rolls with a fabric cleaner, the fabric service life can be extended and the cleaning outlay reduced.

      Read more
      | Optimization | Dryer section
      ProRelease+

      ProRelease+ has an efficient and energy-saving sealing system that ensures stable web pickup in the first dryer groups. A high vacuum in the release zone allows a shorter draw at same speed.

      Read more
      | Optimization | Dryer section
      ProSafe

      With the ProSafe rescue shell, personnel can be rescued from drying cylinders, creping cylinders, Yankee cylinders, boilers and similar containers with small side access openings.

      Read more
      | Optimization | Dryer section
      RollCleaner

      RollCleaner is an online cleaning system for roll surfaces. It cleans the surfaces with a foamed non-woven fabric wheel and “brushes off” stubborn contamination with an action that is gentle on the surface.

      Read more
      | Optimization | Dryer section
      RopeRing

      The RopeRing is a molded steel ring that accurately lines the rope groove. It is precisely adapted to the groove profile and can thus be directly installed.

      Read more
      | Optimization | Dryer section
      SeaLencer

      SeaLencer is a sealing strip system for suction rolls. It substantially reduces the noise stress in the area of the paper or board machine, while achieving a longer service life through a lower drive power.

      Read more
      | Optimization | Dryer section
      SensoTension DE

      Constantly rising productivity and quality requirements lead to higher demands on fabric and web run and thus also on the dryer fabric tension. Reliable fabric tensioning systems are therefore increasingly gaining significance. Exactly adjustable and constant dryer fabric tension is the most important precondition.

      Read more
      | Optimization | Dryer section
      S-Stabilizer

      The S-Stabilizer stabilizes the web if there is a turbulent web run or edge flutter in the two-tier dryer section. In addition, the frequency of breaks is reduced due to the supported web run.

      Read more
      | Optimization | Dryer section
      SteamJoints

      SteamJoints are steam joints with stationary siphons. They reliably dewater at the lowest differential pressure. Costs can be lowered due to low consumption of fresh steam.

      Read more
      | Optimization | Dryer section
      Steam Technology Optimization Package

      With its Steam Technology Optimization Package, Voith provides tailored customer solutions for drying paper in combination with cylinder installations.

      Read more
      | Optimization | Dryer section
      Tensioning devices and guides

      The tensioning devices and guides from Voith ensure smooth operation of the machine at all times.

      Read more
      | Optimization | Dryer section
      ThermoBars

      ThermoBars increase the condensate film turbulence in the drying cylinder. The heat transfer in the drying cylinder is improved and drying performance increased.

      Read more
      | Optimization | Dryer section
      TransferFoil

      TransferFoil stabilizes the web from the press into the dryer section, eliminating problems such as edge detachment, edge flutter and crease formation.

      Read more
      | Optimization | Dryer section
      VentiBox

      The VentiBox hot air blow box is used for ventilating one- and two-tier dryer sections. It prevents the edge of the paper web from turning up and provides for better conditioning of the dryer fabric.

      Read more
      | Optimization | Dryer section
      VentiDoc

      The VentiDoc doctor is for ventilating one- and two-tier dryer sections. It combines excellent doctoring with optimal ventilation of the surrounding dryer pocket.

      Read more
      | Optimization | Dryer section
      VentiPipe

      The VentiPipe hot air blow pipe improves ventilation in the fabric loops of the dryer group and removes moisture more efficiently. Hydrolysis on the dryer fabrics is prevented.

      Read more
      | Optimization | Dryer section
      VentiStabilizer

      The VentiStabilizer stabilizes the web if there is an unsteady web run or edge flutter in the two-tier dryer section. Therefore edge flutter and the frequency of breaks are reduced.

      Read more

      • Coating & sizing

      Coating & sizing

      | Optimization | Coating & sizing
      Flying Splice unwinder

      The Flying Splice unwinder allows fully automatic reel change for offline calenders. The changing times are clearly reduced compared to a manual change.

      Read more
      | Optimization | Coating & sizing
      IntegratedDryer

      The IntegratedDryer combines infrared and air drying and is used after the coating units. As it recovers heat by means of thermal coupling, it is especially energy saving.

      Read more
      | Optimization | Coating & sizing
      PrevoSystems

      PrevoSystems are fully automated threading systems that ensure the highest level of safety for the operating personnel and short threading times.

      Read more
      | Optimization | Coating & sizing
      qDry Pro

      qDry Pro is a space- and energy-saving drying concept that combines infrared and air drying. The energetically coupled air hood is heated solely by the IR waste heat and thus does not require its own heat source.

      Read more
      | Optimization | Coating & sizing
      SpeedRod M

      SpeedRod M is an optimization in the area of the rod holder on coating units. The system ensures fast, easy and safe replacement of wear parts. As a result, unplanned downtimes can be reduced significantly.

      Read more

      • Calender

      Calender

      | Optimization | Calender
      CalCatch

      The CalCatch gripping device guarantees safety-compliant operation of super calender movable platforms. The retrofit is possible in the shortest time and without disassembly of the cage.

      Read more
      | Optimization | Calender
      CalDoc

      Calender doctor systems guarantee optimal cleaning of roll surfaces. The flexible blade holder allows uniformly low system pressure and prevents streaking.

      Read more
      | Optimization | Calender
      CalFrame

      CalFrame involves overhauling the frame in the super calender for uniformly good and reproducible paper quality. Maintenance is simplified due to replaceable wear bars.

      Read more
      | Optimization | Calender
      FlexiTherm

      The FlexiTherm heating system improves calendering in the calender for new or modified paper qualities. Optimal cross profiles are generated by means of a uniform roll surface temperature.

      Read more
      | Optimization | Calender
      FlexiThermEdge

      The FlexiThermEdge edge heater provides targeted heating of the paper web’s edge. Since the web edges are calendered with additional distributed load, more marketable paper can be produced.

      Read more
      | Optimization | Calender
      Flying Splice LS (Low speed)

      Flying Splice LS allows a fully automatic reel change on offline calenders. The time required for the reel change is thus reduced, and the calender capacity can be increased by up to 20%.

      Read more
      | Optimization | Calender
      PrevoSystems

      PrevoSystems are fully automated threading systems that ensure the highest level of safety for the operating personnel and short threading times.

      Read more
      | Optimization | Calender
      Rebuild concepts for soft calenders

      Soft calenders assume an important function in producing gloss and smoothness. Rebuild solutions increase the efficiency of calenders and improve paper quality.

      Read more
      | Optimization | Calender
      RollCleaner

      RollCleaner is an online cleaning system for roll surfaces. It cleans the surfaces with a foamed non-woven fabric wheel and “brushes off” stubborn contamination with an action that is gentle on the surface.

      Read more
      | Optimization | Calender
      Sensomat Fit – rebuild concept

      The Sensomat Fit rebuild concept is a modular modernization package from Voith Paper. It improves the quality of the winding behind offline calenders, which leads to improved downstream processing.

      Read more
      | Optimization | Calender
      Uniroll Fit

      Uniroll Fit is an upgrade program for Unirolls. Rolls of an older generation are converted to a ball-mounted, single-part design with continued use of existing guide roll shafts.

      Read more
      | Optimization | Calender
      VibroSoft

      VibroSoft is a hydrodynamic vibration damper that reduces vibrations for profile rolls and floating rolls, resulting in extended service life of felts, roll covers and doctors.

      Read more

      • Reeling

      Reeling

      | Optimization | Reeling
      EcoChange CA

      The EcoChange CA changing system allows a reliable reel spool change. It forms an excellent beginning for the winding and reduces shreds, while at the same time producing little broke.

      Read more
      | Optimization | Reeling
      EcoChange CIT

      The EcoChange CIT changing system is based on innovative tag technology and provides a high level of reliability for every paper grade during reel spool change.

      Read more
      | Optimization | Reeling
      EcoChange W

      The EcoChange W system provides high change quality, with a nozzle traversing speed that can be adapted to various paper characteristics.

      Read more
      | Optimization | Reeling
      GooseNeck

      GooseNeck is a reel changing system that guarantees short changing times and a high level of changing efficiency. It operates reliably using compressed air.

      Read more
      | Optimization | Reeling
      Reel drum design

      The reel drum design is an important element for error-free winding, along with the web draw, line load path and center torque. Having the optimal winding structure facilitates further processing.

      Read more

      • Winder

      Winder

      | Optimization | Winder
      Gecko OneStep

      Gecko OneStep is based on the Gecko hot-melt system and is a compact unit that is suitable for retrofitting an automatic roll changing system. With its combined perforation and gluing process, roll change times are noticeably reduced and productivity is increased.

      Read more
      | Optimization | Winder
      Reel drum design

      The reel drum design is an important element for error-free winding, along with the web draw, line load path and center torque. Having the optimal winding structure facilitates further processing.

      Read more
      | Optimization | Winder
      RollerBar

      RollerBar is an innovation for your winder featuring spreader bar technology that enables finer cuts along the entire paper web.

      Read more

      • Pulping

      Pulping

      | Optimization | Pulping
      HelixRotor

      The HelixRotor can achieve a significant increase in the throughput of HC pulpers in the stock preparation phase. As a result the productivity of Voith and non-Voith pulpers increases substantially.

      Read more
      | Optimization | Pulping
      IntensaRotor R

      IntensaRotor R is used to pulp all sorts of secondary fibers. Due to its new rotor design, it brings about low energy consumption and an optimal pulping effect.

      Read more
      | Optimization | Pulping
      IPV Rotor

      The new design of Voith’s IPV Rotor achieves energy-saving and at the same time efficient pulping in stock preparation.

      Read more

      • Screening / Fractionation

      Screening / Fractionation

      | Optimization | Screening / Fractionation
      C-bar HerculeX screen basket

      To withstand the enormous flow and pressure conditions in screening, Voith has developed the strongest screen basket on the market – C-bar HerculeX.

      Read more
      | Optimization | Screening / Fractionation
      C-bar Insert

      The new screen basket C-bar Insert combines maximum stability with short downtimes and low investment and maintenance costs. It can be used in cages from Voith and other manufacturers.

      Read more
      | Optimization | Screening / Fractionation
      MultiFoil rotors

      MultiFoil rotors are the ideal combination of the highest screening quality and throughput rates. Innovative blade geometry prevents the spinning of fibers and reduces pulsations.

      Read more
      | Optimization | Screening / Fractionation
      NDuraPlate - the new generation of screen plates

      Screen plates of the NDuraPlate type have a higher open surface, thanks to new materials. Replaceable, reversible bars and highly wear-resistant materials ensure a long service life.

      Read more
      | Optimization | Screening / Fractionation
      Reject screen clearing blades

      The reject screen is a non-pressurized final-stage screen with screen tray and special rotor. It features various clearing blades for the functions of clearing, loosening and distributing.

      Read more

      • Washing / Thickening / Dewatering

      Washing / Thickening / Dewatering

      | Optimization | Washing / Thickening / Dewatering
      Upgrade to BaglessPlus sectors

      In converting a disc filter with conventional sectors and filter bags to BaglessPlus sectors, the specific production capacity is increased and the filtrate quality is noticeably improved.

      Read more

      • Refining / Deflaking

      Refining / Deflaking

      | Optimization | Refining / Deflaking
      Pluralis Line for refiner from other manufacturers

      Refiner from other manufacturers can be rebuilt to Pluralis fillings after an analysis of their condition and the selection of a suitable Pluralis filling.

      Read more

      • Pulping

      Pulping

      | Optimization | Pulping
      HelixRotor

      The HelixRotor can achieve a significant increase in the throughput of HC pulpers in the stock preparation phase. As a result the productivity of Voith and non-Voith pulpers increases substantially.

      Read more
      | Optimization | Pulping
      IntensaRotor R

      IntensaRotor R is used to pulp all sorts of secondary fibers. Due to its new rotor design, it brings about low energy consumption and an optimal pulping effect.

      Read more
      | Optimization | Pulping
      IntensaTechnology

      With IntensaTechnology, Voith offers a rebuild concept for LC pulpers. The results are more efficient pulping with lower specific energy consumption and a higher pulping capacity.

      Read more
      | Optimization | Pulping
      IPV Rotor

      The new design of Voith’s IPV Rotor achieves energy-saving and at the same time efficient pulping in stock preparation.

      Read more
      | Optimization | Pulping
      NDuraPlate B

      With the NDuraPlate B, a screen plate with a new and innovative perforation is available. The kidney bean design of the holes provides significant improvements in yield, efficiency and throughput.

      Read more
      | Optimization | Pulping
      NDuraPlate D

      The newly developed hole design of the NDuraPlate D results in better performance and longer service life. The high quality NDura material improves robustness and wear resistance.

      Read more
      | Optimization | Pulping
      NDuraPlate ES ML

      The NDuraPlate ES ML screen plate, made of highly wear-resistant stainless steel, is a multi-layer screen plate system for pulpers in stock preparation. . Its unique perforation improves defibering behavior.

      Read more
      | Optimization | Pulping
      NDura Rotor Fiberizer

      The NDura Rotor Fiberizer is equipped with a star rotor made of highly wear-resistant stainless steel (chill casting), which extends the service life. In addition, a special hub design protects the shaft.

      Read more
      | Optimization | Pulping
      NDura Rotor for Flat Screen Machines

      The Voith NDura Rotor is a high-quality, wear-protected rotor for all kinds of flat screen machines. It is characterized by its high operational reliability.

      Read more
      | Optimization | Pulping
      Pulper rotor scrapers with replaceable wear shoes

      Pulper rotor scrapers are maintenance friendly, two-part scrapers with replaceable scraping shoes. They can increase the service life of the rotors and efficiency of the pulping process.

      Read more

      • Cleaning

      Cleaning

      | Optimization | Cleaning
      HiPlast Black

      The new generation of wear-resistant polymers and the optimized design make the HiPlast Black cleaner cone from Voith an attractive option for use in stock preparation.

      Read more
      | Optimization | Cleaning
      Junk trap type II – supplementary packages for cleaners

      The junk trap type II supplementary package improves the functioning of the junk trap in cleaners. The standardized trap minimizes the stocking of replacement parts.

      Read more
      | Optimization | Cleaning
      Optimization options for LC cleaners

      Save valuable resources with our rebuild solutions for LC cleaners and at the same time improve the performance of your existing system.

      Read more
      | Optimization | Cleaning
      Vortex Breaker – rotary brake for junk traps

      The Vortex Breaker is a rotary brake for junk traps. The ready-to-install retrofit set extends the service life of knife gate valves and facilitates reliable functioning of the trap.

      Read more
      | Optimization | Cleaning
      Wear-resistant Cones for HD Cleaner

      H-Cone, E-Cone and IndiCone are wear-resistant cones for reliable and efficient use with high stock consistencies.

      Read more

      • Refining / Deflaking

      Refining / Deflaking

      | Optimization | Refining / Deflaking
      Optimization with Pluralis Line

      Energy consumption can be reduced by optimizing existing refining systems after an analysis of their condition and the selection of a suitable Pluralis filling.

      Read more
      | Optimization | Refining / Deflaking
      Pluralis Line for refiner from other manufacturers

      Refiner from other manufacturers can be rebuilt to Pluralis fillings after an analysis of their condition and the selection of a suitable Pluralis filling.

      Read more
      RIGHT OFFCANVAS AREA